Omega Seamaster Diver 300M Black Dial Ceramic Bezel VS Factory Super Clone

VS Factory Omega Seamaster 300M 210.32.42.20.01.001 – Hands-On Review

Alright so this one needs no introduction really. The VS Factory Seamaster 300M ref 210.32.42.20.01.001 has been one of the hottest reps in the game for a while now, and honestly the hype is justified. I've had this piece in hand and want to break down what makes the VS version sit at the top.

Case Dimensions & Build

VS went full 1:1 on the case dimensions here. 42mm diameter, roughly 13.5mm thick — matches the gen spec sheet. On wrist it wears exactly how you'd expect a Seamaster 300 to wear. Not too chunky, good presence without being obnoxious. The 42mm sweet spot that works for most wrist sizes.

The Bezel & Dial Details

This is where VS really earns their reputation. The unidirectional ceramic bezel — the clicks feel solid, the markings are crisp, color is spot on. But let's talk about what everyone actually cares about: the wave dial.

That signature wave pattern on the Seamaster 300 is probably the single hardest detail to replicate convincingly. VS nailed it. The depth of the grooves, the way light plays across them at different angles. Side by side with gen? You're splitting hairs.

Lume plots on all the hour markers from 12 through to 11 are well done. Good charge, decent glow that actually lasts. The pip on the bezel lights up too. No complaints there.

Crystal

Sapphire glass. Clear, no distortion, takes a beating without scratching up. Pretty standard for VS at this tier but worth mentioning — some factories still cheap out on the crystal even on their "best version" pieces. VS doesn't.

Movement & How to Operate It

Under the hood you get VS's clone 8800 movement visible through the display caseback. The finishing on the rotor and bridges looks the part through the window.

Quick rundown on operation if you're new to this ref. The crown is screw-down — unscrew counterclockwise and it pops out on its own. Fresh out of the box with no power reserve built up, you'll want to wind it clockwise about 30 to 40 turns manually. Pull the crown to the first position and you can set the date window at 6 o'clock. Pull it out one more click for time setting. Push it back in when you're done and screw it down until it locks. Simple stuff.

Water Resistance

Rated at 100 meters. Swimming, washing your hands, getting caught in the rain — all fine. I'd still recommend having the gaskets checked periodically though. Seals degrade over time on any watch, rep or gen, so just keep that in mind if you're actually taking it in the water regularly.

Final Take

The VS Factory Omega Seamaster 300M 210.32.42.20.01.001 is about as good as it gets right now for this reference. Wave dial execution, ceramic bezel quality, the clone 8800 with display back — it all comes together. If you've been going back and forth on which Seamaster 300 rep to pull the trigger on, this is the one. Not even a close call honestly.